388
Task Command
Display VSI information.
display
l2vpn
vsi
[
name
vsi-name
] [
verbose
]
Display information about automatically
discovered VPLS PEs.
display l2vpn auto-discovery
[
peer
ip-address
] [
vsi
vsi-name
]
Display VPLS label block information.
display l2vpn bgp
[
peer
ip-address
|
local
] [
vsi
vsi-name
]
[
verbose
]
Display BGP L2VPN peer group information.
display bgp group l2vpn
[
group-name
group-name
]
Display VPLS PE information discovered by
BGP.
display bgp l2vpn auto-discovery
[
peer
ip-address
{
advertised
|
received
} [
statistics
] |
route-distinguisher
route-distinguisher
[
pe-address
ip-address
[
advertise-info
] ]
|
statistics
]
Display VPLS label block information
discovered by BGP.
display bgp l2vpn signaling
[
peer
ip-address
{
advertised
|
received
} [
statistics
] |
route-distinguisher
route-distinguisher
[
site-id
site-id
[
label-offset
label-offset
[
advertise-info
] ] ] |
statistics
]
Display BGP L2VPN peer information.
display bgp peer l2vpn
[
ip-address
mask-length
|
{
ip-address
|
group-name
group-name
}
log-info
|
[ [
ip-address
]
verbose
] [
standby
slot
slot-number
] ]
Display BGP L2VPN update group
information.
display bgp update-group l2vpn
[
ip-address
]
Clear MAC address entries for VSIs.
reset l2vpn mac-address
[
vsi
vsi-name
]
Reset L2VPN BGP sessions.
reset bgp
{
as-number
|
ip-address
[
mask-length
] |
all
|
external
|
group
group-name
|
internal
}
l2vpn
Clear packet statistics on an Ethernet service
instance.
reset l2vpn statistics ac
[
interface
interface-type
interface-number
service-instance
instance-id
]
For more information about the
display bgp group l2vpn
,
display bgp peer l2vpn
,
display bgp
update-group l2vpn
, and
reset bgp
commands, see
Layer 3—IP Routing Command Reference
.
VPLS configuration examples
Static PW configuration example
Network requirements
Configure VPLS on each PE, and establish static PWs between the PEs to interconnect the CEs.
