66
display mpls ldp remote-peer
Description
Use the
display mpls ldp remote-peer
command to display information about remote LDP peers.
Related commands:
mpls ldp
(interface view)
,
mpls ldp
(system view)
, and
remote-ip
.
Syntax
display mpls ldp remote-peer
[
remote-name
remote-peer-name
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
remote-name
remote-peer-name
: Displays information about a remote peer.
remote-peer-name
indicates
the name of the remote peer, which is a case-insensitive string of 1 to 32 characters.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see the
Fundamentals Configuration Guide
.
•
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
•
exclude
: Displays all lines that do not match the specified regular expression.
•
include
: Displays all lines that match the specified regular expression.
•
regular-expression
: Specifies a regular expression, which is a case-sensitive string of 1 to 80
characters.
Examples
# Display information about remote peer BJI.
<Sysname> display mpls ldp remote-peer remote-name BJI
LDP Remote Entity Information
--------------------------------------------------------------------------
Remote Peer Name : BJI
Remote Peer IP : 3.3.3.3 LDP ID : 1.1.1.1:0
Transport Address : 1.1.1.1
Configured Keepalive Timer : 45 Sec
Configured Hello Timer : 45 Sec
Negotiated Hello Timer : 45 Sec
Hello Message Sent/Rcvd : 3/2 (Message Count)
--------------------------------------------------------------------------
Table 28
Command output
Field Description
LDP ID
Local LDP identifier. See
for detailed description of
LDP ID.
