40
Table 17
Command output
Field Description
Total number of Routes
Total number of matched routes in the FIB
Flag
Flag of the route. Possible values are:
•
U—Usable route
•
G—Gateway route
•
H—Host route
•
B—Blackhole route
•
D—Dynamic route
•
S—Static route
Label
Label value added to a packet
Token
LSP index, used to associate an NHLFE entry
Interface
Outgoing interface of packets
display ipv6 fib vpn-instance
ipv6-address
Description
Use the
display ipv6 fib
vpn-instance
ipv6-address
command to display a VPN’s IPv6 FIB information that
matches a destination IPv6 address.
If you do not specify the prefix length, the command displays the matched IPv6 FIB information that has
the longest prefix. If you specify the prefix length, the command displays the matched IPv6 FIB information
that has the exact prefix length.
Syntax
display
ipv6 fib vpn-instance
vpn-instance-name ipv6-address
[
prefix-length
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance-name
: Specifies the VPN instance name, which is a case-sensitive string of 1 to 31
characters.
ipv6-address
: Specifies the destination IPv6 address.
prefix-length
: Specifies the prefix length of the destination IPv6 address, ranging from 0 to 128.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see the
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
