366
peer filter-policy (BGP-VPNv6 subaddress family view)
Description
Use the
peer filter-policy
command to apply a filtering policy to a peer or peer group.
Use the
undo peer filter-policy
command to remove the configuration.
By default, no filtering policy is applied to a peer or peer group.
Related commands:
peer as-path-acl
.
Syntax
In BGP-VPNv4 subaddress family view:
peer
{
group-name
|
ip-address
}
filter-policy
acl-number
{
export
|
import
}
undo peer
{
group-name
|
ip-address
}
filter-policy
[
acl-number
] {
export
|
import
}
In BGP-VPNv6 subaddress family view:
peer
ip-address
filter-policy
acl6-number
{
export
|
import
}
undo peer
ip-address
filter-policy
[
acl6-number
] {
export
|
import
}
View
BGP-VPNv6 subaddress family view
Default level
2: System level
Parameters
group-name
: Specifies the name of the peer group, which is a case-sensitive string of 1 to 47 characters.
ip-address
: Specifies the IP address of the peer.
acl-number
: Specifies the IP ACL number, ranging from 2000 to 3999.
acl6-number
: Specifies the IPv6 ACL number, ranging from 2000 to 3999.
export
: Filters the routes to be advertised to the specified peer or peer group.
import
: Filters the routes received from the specified peer or peer group.
Examples
# In BGP-VPNv6 subaddress family view, apply a filtering policy to filter the routes received from peer
1.1.1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family vpnv6
[Sysname-bgp-af-vpnv6] peer 1.1.1.1 filter-policy 2003 import
peer ipv6-prefix (BGP-VPNv6 subaddress family view)
Description
Use the
peer ipv6-prefix
command to apply an IPv6 prefix list to filter routes for a peer.
Use the
undo peer ipv6-prefix
command to remove the configuration.
By default, no IPv6 prefix list is applied to filter routes for a peer.
