Audio/USB board
Description
Spare part number
Audio/USB board (includes audio jack, USB port, and cable)
758046-001
Before removing the audio/USB board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the Battery (see
), and then remove the following components:
a.
Service cover (see
)
b.
Hard drive (see
c.
Optical drive (see
d.
Keyboard (see
e.
Top cover (see
Remove the audio/USB board:
1.
Release the ZIF connector
(1)
to which the audio/USB board cable is attached, and then
disconnect the audio/USB board cable from the system board.
2.
Remove the Philllips PM2.5×4.5 screw
(2)
that secures the audio/USB board to the
base enclosure.
78
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Содержание 350 G1
Страница 1: ...HP 355 G2 Notebook PC and HP 350 G1 Notebook PC Maintenance and Service Guide ...
Страница 4: ...iv Safety warning notice ...
Страница 10: ...x ...
Страница 31: ...Computer major components Computer major components 21 ...