manualshive.com logo in svg

HP 345646-001 - StorageWorks NAS 2000s External Storage Server, Руководство администратора

HP 345646-001 - StorageWorks NAS 2000s External Storage Server - это надежное устройство для хранения данных. Для удобной установки и настройки, загрузите бесплатное руководство по установке с manualshive.com. Скачать руководство можно в разделе "manual". Воспользуйтесь этим ресурсом для эффективной работы с вашим сервером.

Поделиться
Скачать
background image

System Overview

18

NAS 2000s Administration Guide

Product Redundancy

The NAS 2000s is specifically designed to perform file serving tasks for networks. Using 
industry standard components, redundancy of power supplies, NICs, and fans ensures 
reliability.

Other industry standard features, such as redundant array of independent drives (RAID) and 
remote manageability, further enhance the overall dependability of the NAS 2000s.

The server contains dual 36.4 GB hard drives preconfigured with the NAS operating system so 
that the active system volume is mirrored (RAID 1+0) to the second drive. If one of the 
internal drives fails, the integrity of the system is preserved, because the system will use the 
copy of the operating system on the remaining healthy drive. The drives in the server are 
hot-pluggable, so the failed drive can be replaced while the system is running. When the failed 
drive is replaced, the system automatically uses the version of the operating system on the 
healthy drive to rebuild the replacement.

The NAS 2000s internal storage server also contains four 146.8 GB hard drives for data 
storage. The NAS 2000s external storage server ships with four 146.8 GB hard drives in an 
external storage cabinet connected to the Smart Array 6404 controller. These hard drives are 
not configured, allowing customizable configuration options. These drives may be configured 
to RAID levels 0, 1+0, 5, and Advanced Data Guarding (ADG).

Note:  

RAID 1+0 requires an even number of drives.

The NAS 2000s includes dual power supplies. A power supply can be replaced while the 
server is running. To ensure redundancy, it is important to connect each power supply to a 
separate power source. If one power source fails, the server remains operational through the 
second power source.

Through a seamless, hardware-based, graphical remote console, the Integrated Lights-Out port 
provides the administrator with full control of the server from a remote location. Using a client 
browser, the administrator can remotely power up, power down, and operate the console. A 
built in processor makes the port independent of the server and the operating system.

Product Scalability

The NAS 2000s offers optimized performance for a growing environment. Storage capacity 
can increase as a business grows without incurring downtime or compromising performance. 
The internal model ships with four 146.8 GB disk drives, providing 587.2 GB of raw storage. 
The external NAS 2000s model can support up 27 TB of raw storage capacity. This maximum 
capacity is achieved by connecting thirteen HP StorageWorks storage enclosures to three 
Smart Array 4-port controllers and the integrated SCSI array connector.  Each storage 
enclosure supports up to fourteen 146.8 GB hard disks, and the NAS system has four 
additional SCSI bays, for a total of 186 hard disk drives.

The external NAS 2000s model can support up 27 TB of raw storage capacity. This maximum 
capacity is achieved by connecting thirteen HP StorageWorks storage enclosures to three 
Smart Array 4-port controllers and the integrated SCSI array connector.  Each storage 
enclosure supports up to fourteen 146.8 GB hard disks, and the NAS system has four 
additional internal SCSI bays, for a total of 186 hard disk drives. 

Note:  

Each fully populated HP StorageWorks 4300/4400 Family storage enclosure can contain up 

to14 hard drives.

Содержание 345646-001 - StorageWorks NAS 2000s External Storage Server









































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 345646-001 - StorageWorks NAS 2000s External Storage Server

NEC Express5800/T110g-E Quick Start Manual preview
Express5800/T110g-E
Бренд: NEC Страницы: 2
Juniper TX MATRIX PLUS Hardware Manual preview
TX MATRIX PLUS
Бренд: Juniper Страницы: 502
Buffalo MiniStation HD-PF320U2 Specifications preview
MiniStation HD-PF320U2
Бренд: Buffalo Страницы: 2
Sangamo CHOICE PR1 User Instructions preview
CHOICE PR1
Бренд: Sangamo Страницы: 2
morse 400A-96-125 Operator'S Manual preview
400A-96-125
Бренд: morse Страницы: 6
Paxton Net2Air Ins-40085-US Quick Start Manual preview
Net2Air Ins-40085-US
Бренд: Paxton Страницы: 4
Supermicro SUPERSERVER 6034H-X8R User Manual preview
SUPERSERVER 6034H-X8R
Бренд: Supermicro Страницы: 128
Comet Labs GS8+ User Manual preview
GS8+
Бренд: Comet Labs Страницы: 11
Korenix JetNet 3705 User Manual preview
JetNet 3705
Бренд: Korenix Страницы: 25
Ubiquiti EdgeRouter 12 Quick Start Manual preview
EdgeRouter 12
Бренд: Ubiquiti Страницы: 23
Weather Guard Rapid Mount 9909-3-02 Installation Manual preview
Rapid Mount 9909-3-02
Бренд: Weather Guard Страницы: 9
SMC Networks TigerSwitch 100 SMC6924VF Management Manual preview
TigerSwitch 100 SMC6924VF
Бренд: SMC Networks Страницы: 174
Matrix Switch Corporation MSC-XD88S Product Manual preview
MSC-XD88S
Бренд: Matrix Switch Corporation Страницы: 60
Glyph DV-Project Specification preview
DV-Project
Бренд: Glyph Страницы: 2
GARANT GridLine 930505 Instruction Manual preview
GridLine 930505
Бренд: GARANT Страницы: 116
TYAN B3970-U Service Engineer'S Manual preview
B3970-U
Бренд: TYAN Страницы: 77
NetApp FAS22 Series Manual preview
FAS22 Series
Бренд: NetApp Страницы: 9
Allied Telesis IS230-10GP Web User Manual preview
IS230-10GP
Бренд: Allied Telesis Страницы: 136

Бренды по названию

Популярные бренды

Загрузить еще бренды