117
Default level
2: System level
Parameters
dot1d-1998
: Configures the device to calculate the default path cost for ports based on IEEE
802.1d-1998.
dot1t
: Configures the device to calculate the default path cost for ports based on IEEE 802.1t.
legacy
: Configures the device to calculate the default path cost for ports based on a private
standard.
Description
Use
stp pathcost-standard
to specify a standard for the device to use when calculating the default
path costs for ports.
Use
undo stp pathcost-standard
to restore the default.
By default, the switch calculates the default path cost for ports based on a private standard.
If you change the standard that the device uses in calculating the default path costs, you restore the
path costs to the default.
Related commands:
stp cost
and
display stp
.
Examples
# Configure the device to calculate the default path cost for ports based on IEEE 802.1d-1998.
<Sysname> system-view
[Sysname] stp pathcost-standard dot1d-1998
stp point-to-point
Syntax
stp point-to-point
{
auto
|
force-false
|
force-true
}
undo stp point-to-point
View
Ethernet interface view, port group view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
auto
: Specifies automatic detection of the link type.
force-false
: Specifies the non-point-to-point link type.
force-true
: Specifies the point-to-point link type.
Description
Use
stp point-to-point
to configure the link type of the ports.
Use
undo stp point-to-point
to restore the default.
The default setting is
auto
and the spanning tree device automatically detects whether a port
connects to a point-to-point link.
Configured in Ethernet interface view, the setting takes effect only on the interface.
Configured in port group view, the setting takes effect on all member ports in the port group.
