HP 280 G3 Microtower Business, Руководство по техническому обслуживанию и ремонту, Страница: 35 / 116

Solid-state drive module
The M.2 solid-state drive module is located under the drive cage.
Solid-state drives, M.2
256-GB, PCIe
128-GB, PCIe
128-GB, SATA-3
1. Prepare the computer for disassembly ( Preparation for disassembly on page 15 ).
2. Remove the access panel ( Access panel on page 16 ).
3. Remove the front bezel ( Front bezel on page 21 ).
4. Remove the optical drive ( Optical drive on page 23 ).
5. Remove the drive cage ( Hard drive on page 25 ).
6. Remove the Phillips M2.0×3.0 screw (1), and then pull the module out of the socket (2).
To install the solid-state drive module, reverse the removal procedures.
Solid-state drive module 27