Speakers
Description
Spare part number
Speakers (includes left and right speakers and cable)
925306-001
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
).
5.
Remove the optical drive (see
), if installed.
6.
Remove the bottom cover (see
To remove the speakers:
1.
Disconnect the speaker cable from the system board (1).
2.
Remove the cable from its routing path along the bottom of the computer (2), and then lift up and
remove the speakers from the computer (3).
NOTE:
The speakers are not secured with screws. Note the rubber gaskets (4) that help secure the
speakers to the computer. When installing the speakers, make sure the gaskets are installed correctly.
Reverse this procedure to install the speakers.
52
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Содержание 255 G6
