Bottom cover
Description
Spare part number
Bottom cover for use in models with an optical drive:
●
Asteroid silver
929894-001
●
Dark ash siliver
929895-001
Bottom cover for use in models without an optical drive:
●
Dark ash siliver
929897-001
Before removing the bottom cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
).
5.
Remove the optical drive (see
), if installed.
To remove the bottom cover:
1.
Position the computer upside down with the front toward you.
2.
Peel back the rubber feet enough to access the screws underneath (1)
40
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Содержание 250 G6
