Installing Components in the Rack
HP 10842 Rack Reference Guide
4-15
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: e-ch4 Installing Components in the Rack
Codename: Ridgeback Part Number: 284358-002 Last Saved On: 10/11/02 4:10 PM
Sliding Rails
For a sliding rail installation, you need to install the component rails on the
component before you can insert it into the rack.
To install the component rails on the component:
1.
Locate the component rails that you set aside when they were removed from the
sliding rail assemblies.
2.
Use three 8-32 x 3/8 screws to install each component rail on the side of the
component.
Figure 4-12: Attaching the component rails to the
component
