manualshive.com logo in svg

HP 17 Laptop PC, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP 17 Laptop PC Скачать руководство пользователя страница 17

Component

Description

WARNING!

To reduce the risk of personal injury, adjust the 

volume before putting on headphones, earbuds, or a headset. 
For additional safety information, refer to the Regulatory, 
Safety, and Environmental Notices.

To access this guide:

▲

Select the Start button, select HP Help and Support, and 
then select HP Documentation.

NOTE:

When a device is connected to the jack, the computer 

speakers are disabled.

Display

Component

Description

(1)

Camera light

On: The camera is in use.

(2)

Camera

Allows you to video chat, record video, and record still images.

(3)

Internal microphone

Records sound.

(4)

WLAN antennas*

Send and receive wireless signals to communicate with wireless local 
area networks (WLANs).

*The antennas are not visible from the outside of the computer, and antenna location varies. For optimal transmission, keep the areas 
immediately around the antennas free from obstructions.

For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or 
region.

To access this guide:

▲

Select the Start button, select HP Help and Support, and then select HP Documentation.

Display

9

Содержание 17 Laptop PC















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды