HP 17-ap000, Руководство по техническому обслуживанию и ремонту, Страница: 48 / 91

Memory module
Description Spare part number
Memory
4 GB 2400 MHz 1.2 v DDR4 shared 862397-850
8 GB 2400 MHz 1.2 v DDR4 shared 862398-850
16 GB 2400 MHz 1.2 v DDR4 shared 865396-850
16 GB 2800 MHz XMP 1.35 v DDR4 shared L07040-850
Before removing a memory module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Base enclosure (see Base enclosure on page 38 )
b. Battery (see Battery on page 31 )
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module, (the
memory module tilts up.)
2. Remove the memory module (2) by pulling the module away from the slot at an angle.
Reverse this procedure to install a memory module.
36 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts