manualshive.com logo in svg

HP 15-ew0 Series, Руководство по техническому обслуживанию и ремонту, Страница: 31 / 100

Поделиться
Скачать
HP 15-ew0 Series Скачать руководство пользователя страница 31

Removal and replacement procedures 

preliminary requirements

4

Use this information to properly prepare to disassemble and reassemble the computer.

Tools required

You need the following tools to complete the removal and replacement procedures:

●

Nonconductive, nonmarking pry tool

●

Phillips P0 screwdriver

●

Phillips P1 screwdriver

●

Suction cups

●

Torx5 screw driver

●

Tweezers

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly and 

assembly procedures.

NOTE:

As you remove each subassembly from the computer, place the subassembly (and all accompanying 

screws) away from the work area to prevent damage.

Plastic parts

Using excessive force during disassembly and reassembly can damage plastic parts.

Cables and connectors

Handle cables with extreme care to avoid damage.

IMPORTANT:

When servicing the computer, be sure that cables are placed in their proper locations during the 

reassembly process. Improper cable placement can damage the computer.

Removal and replacement procedures preliminary requirements

25

Содержание 15-ew0 Series





































































































Отзывы:

Нет отзывов