HP 15-br0xx Скачать руководство пользователя страница 30

Страница: 30 / 77

Removal and replacement procedures

This chapter provides removal and replacement procedures for Authorized Service Provider only parts.

CAUTION:

Components described in this chapter should only be accessed by an authorized service provider.

Accessing these parts can damage the computer or void the warranty.

CAUTION:

This computer does not have user-replaceable parts. Only HP authorized service providers should

perform the removal and replacement procedures described here. Accessing the internal part could damage
the computer or void the warranty.

Component replacement procedures

NOTE:

Details about your computer, including model, serial number, product key, and length of warranty,

are on the service tag at the bottom of your computer. See

{Xref Error! Target does not exist.}

for details.

NOTE:

HP continually improves and changes product parts. For complete and current information on

supported parts for your computer, go to

http://partsurfer.hp.com

, select your country or region, and then

follow the on-screen instructions.

There are as many as 58 screws that must be removed, replaced, and/or loosened when servicing Authorized
Service Provider only parts. Make special note of each screw size and location during removal
and replacement.

Keyboard/top cover

For use in country/region

Spare part number

For use in country/region

Spare part number

In ash silver finish with backlight for use only on computer models equipped with a graphics subsystem with discrete memory

(includes backlight cable and keyboard cable):

For use in Canada

924525-DB1

For use in the United States

924525-001

In ash silver finish with backlight for use only on computer models equipped with a graphics subsystem with UMA memory

(includes backlight cable and keyboard cable):

For use in Canada

924524-DB1

For use in the United States

924525-001

In ash silver finish for use only on computer models equipped with a graphics subsystem with discrete memory

(includes keyboard cable):

For use in Belgium

924523-A41

For use in Latin America

924523-161

For use in Bulgaria

924523-261

For use in the Netherlands

924523-B31

For use in Canada

924523-DB1

For use in Portugal

924523-131

For use in the Czech Republic
and Slovakia

924523-FL1

For use in Romania

924523-271

For use in Denmark, Finland,
and Norway

924523-DH1

For use in Russia

924523-251

For use in France

924523-051

For use in Saudi Arabia

924523-171

For use in Germany

924523-041

For use in Slovenia

924523-BA1

Chapter 5 Removal and replacement procedures

Содержание 15-br0xx














































































Результаты поиска

Содержание 15-br0xx

Отзывы:

Похожие инструкции для 15-br0xx

Бренды по названию

Популярные бренды

HP 15-br0xx, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание 15-br0xx

Отзывы:

Похожие инструкции для 15-br0xx

Бренды по названию

Популярные бренды