Speakers
Description
Spare part number
Speakers (includes cables and four rubber isolators)
924343-001
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
).
5.
Remove the battery (see
6.
Remove the system board (see
Remove the speakers:
1.
Release the speaker cable from the retention clips (1) and routing channel built into the keyboard/
top cover.
2.
Remove the display panel cable from the retention clips (2) and routing channel built into
the left speaker.
3.
Remove the four Phillips PM2.0×6.3 broad head shoulder screws (3) that secure the speakers to
the keyboard/top cover.
Component replacement procedures
49