3.
Remove the board from the computer (3).
Reverse this procedure to install the I/O board.
Heat sink
To remove the heat sink, use these procedures and illustrations.
Table 5-7
Heat sink descriptions and part numbers
Description
Spare part number
Heat sink
M47702-001
Before removing the heat sink, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page 23
).
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
).
Remove the heat sink:
1.
In the order indicated on the heat sink, remove the four Phillips M2.0 × 2.5 screws (1), and then remove
the heat sink from the computer (2).
30
Chapter 5 Removal and replacement procedures for authorized service provider parts
Содержание 14bt-cb000
Страница 4: ...iv Safety warning notice ...