manualshive.com logo in svg

HP 14-bw0 Series, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP 14-bw0 Series Скачать руководство пользователя страница 56

M.2 Solid-state drive (SSD) or eMMC module

Description

Spare part number

M.2 solid-state drive, 256 GB

865902-018

M.2 solid-state drive, 128 GB

827560-049

eMMC module, 128 GB

833958-007

eMMC module, 64 GB

786461-013

eMMC module, 32 GB

779066-023

Before removing the solid-state drive, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 32

).

5.

Remove the optical drive (see 

Optical drive on page 33

), if installed.

6.

Remove the bottom cover (see 

Bottom cover on page 39

).

Remove the solid-state drive:

1.

Remove the Phillips PM2.0×2.0 screw (1) that secures the drive to the system board.

2.

Remove the drive (2) by pulling it away from the connector.

NOTE:

Solid-state drives are designed with notches to prevent incorrect insertion.

Reverse this procedure to reassemble and install the solid-state drive.

48

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Содержание 14-bw0 Series













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды