Electrostatic Discharge
A-2
HP 10000 Series Rack Reference Guide
COMPAQ CONFIDENTIAL
Writer: Amy L. Laffitte File Name: g-appa Electrostatic Discharge
Codename: Mastiff Part Number: 258200-002 Last Saved On: 10/2/02 1:19 PM
Grounding Methods
There are several methods for grounding. Use one or more of the following methods
when handling or installing electrostatic-sensitive parts:
•
Use a wrist strap connected by a ground cord to a grounded workstation or
computer chassis. Wrist straps are flexible straps with a minimum of 1 megohm
±
10 percent resistance in the ground cords. To provide proper ground, wear the
strap snug against the skin.
•
Use heel straps, toe straps, or boot straps at standing workstations. Wear the
straps on both feet when standing on conductive floors or dissipating floor mats.
•
Use conductive field service tools.
•
Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have HP
authorized reseller install the part
NOTE:
For more information on static electricity, or assistance with product installation,
contact your HP authorized reseller.
