HP Enterprise ProLiant DL20 Gen9 страница 104 Скачать руководство пользователя | Manualshive

Страница: 104 / 124

background image

8.

Enter the

fwupdate –d BIOS -f <filename>

command to flash the system ROM.

For help on the FWUPDATE command, enter the following command:

help fwupdate -b

9.

Reboot the server.

A reboot is required after the firmware update for the updates to take effect, and for hardware stability to
be maintained.

For more information about the commands used in this procedure, see the UEFI Shell user guide on the

Hewlett Packard Enterprise website

.

Firmware Update application in the UEFI System Utilities

For systems configured in either boot mode, update the firmware:

1.

Access the System ROM Flash Binary component for your server from the

Hewlett Packard Enterprise

Support Center website

. When searching for the component, always select

OS Independent

to locate

the binary file.

2.

Copy the binary file to a USB media or iLO virtual media.

3.

Attach the media to the server.

4.

During POST, press

F9

to enter the System Utilities.

5.

Select

Embedded Applications

>

Firmware Update

>

System ROM

>

Select Firmware File

.

6.

Select the device containing the flash file.

7.

Select the flash file. This step may take a few moments to complete.

8.

Select

Start firmware update

and allow the process to complete.

9.

Reboot the server. A reboot is required after the firmware update for the updates to take effect and for
hardware stability to be maintained.

Online Flash components

This component provides updated system firmware that can be installed directly on supported operating
systems. Additionally, when used in conjunction with SUM, this Smart Component allows the user to update
firmware on remote servers from a central location. This remote deployment capability eliminates the need for
the user to be physically present at the server to perform a firmware update.

Drivers

IMPORTANT:

Always perform a backup before installing or updating device drivers.

The server includes new hardware that may not have driver support on all OS installation media.

If you are installing an Intelligent Provisioning-supported OS, use

Intelligent Provisioning

and its Configure

and Install feature to install the OS and latest supported drivers.

If you do not use Intelligent Provisioning to install an OS, drivers for some of the new hardware are required.
These drivers, as well as other option drivers, ROM images, and value-add software can be downloaded as
part of an SPP.

If you are installing drivers from SPP, be sure that you are using the latest SPP version that your server
supports. To verify that your server is using the latest supported version and for more information about SPP,
see the

Hewlett Packard Enterprise website

To locate the drivers for a particular server, go to the

Hewlett Packard Enterprise Support Center website

Under

Select your HPE product

, enter the product name or number and click

Go

.

104

Firmware Update application in the UEFI System Utilities

«
...
102
103
104
105
106
...
»

Содержание ProLiant DL20 Gen9





























































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant DL20 Gen9

Univerge SV8100

Бренд: NEC Страницы: 2

Бренд: Basalte Страницы: 2

Бренд: Crown Страницы: 12

eserver xSeries 306

Бренд: IBM Страницы: 46

Бренд: Bang & Olufsen Страницы: 28

FusionServer CH242 V5

Бренд: xFusion Digital Technologies Страницы: 61

Transport GT26-B4987

Бренд: TYAN Страницы: 125

Бренд: ICP DAS USA Страницы: 4

FusionServer 2288 V5

Бренд: xFusion Digital Technologies Страницы: 86

AlphaServer ES45 1B

Бренд: Compaq Страницы: 322

Бренд: Cisco Страницы: 40

Бренд: Gigabyte Страницы: 108

Бренд: Aviosys Страницы: 30

Бренд: 360 Systems Страницы: 137

Бренд: Vlinx Страницы: 47

AirLive WP-201G

Бренд: AirLive Страницы: 56

Бренд: Intel Страницы: 117

2-Bay SATA NAS RAID Server NAS-7200

Бренд: Planet Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды