Hoval UltraGas 15, Техническая информация Инструкции по установке

Страница: 46 / 50

6.10 Parameter list - automatic firing device BIC 960
!
WARNING
Changes to the BIC may only be made by authorised Hoval customer service technicians. The following
table is intended solely to provide information for the Hoval customer service technician!
Automatic firing device UltraGas
®
(15-50)
Parameter Description Unit Level System set values 45 - UG (15) 45 - UG (20) 45 - UG (27) 45 - UG (35) 45 -
UG (50)
1 2AA 32769 Blocking temperature °C OEM 90 90 90 90 90
2 2AC 32770 Maximum reference value °C BE 80 80 80 80 80
3 2AD 32771 Switch-off hysteresis above reference value °C OEM 5 5 5 5 5
4 2AE 32772 Switch-on difference relating to tripping point °C HF 10 10 10 10 10
5 2AF 32773 Proportional part °C OEM 10 10 10 10 10
6 2AG 32774 Integral part sek OEM 180 180 180 180 180
7 2AH 32775 Differential part sek OEM 10 10 10 10 10
8 2AI 32776 Reference value when bus interruption °C HF 75 75 75 75 75
9 2AJ 32777 Max. temperature rise at low flow temperature °C/sek OEM 1 1 1 1 1
10 2AK 32778 Max. temperature rise at high flow temperature °C/sek OEM 0.5 0.5 0.5 0.5 0.5
11 2AL 32779 “Low” flow temperature °C OEM 60 60 60 60 60
12 2AM 32780 “High” flow temperature °C OEM 80 80 80 80 80
13 2BC 32781 Lock-out flue gas temperature °C OEM 110 110 110 110 110
14 2BD 32782 Blocking flue gas temperature °C OEM 100 100 100 100 100
15 2CA 32783 Gas pressure switch attached OEM 1 1 1 1 1
16 2DA 32784 Water pressure sensor attached OEM 1 1 1 1 1
17 2DB 32785 Water pressure warning bar OEM 1 1 1 1 1
18 2DC 32786 Water pressure hysteresis bar OEM 0.2 0.2 0.2 0.2 0.2
19 2DD 32787 Blocking pressure min. bar OEM 0.5 0.5 0.5 0.5 0.5
20 2DE 32788 Blocking pressure min – hysteresis bar OEM 0.2 0.2 0.2 0.2 0.2
21 2DF 32789 Blocking pressure max bar OEM 2.8 2.8 2.8 2.8 2.8
22 2DG 32790 Blocking pressure max – hysteresis bar OEM 0.2 0.2 0.2 0.2 0.2
23 2DH 32791 Lock-out pressure max bar OEM 3 3 3 3 3
24 2DI 32792 Max. boiler performance at pressure warning % OEM 50 50 50 50 50
25 2EC 32793 Ionisation warning µA OEM 3 3 3 3 3
26 2FA 32794 Number of hall impulses per revolution OEM 2 2 2 2 2
27 2FF 32795 Fan speed during the first period of pre-venting min
–1
OEM 5000 6300 5500 6500 6800
28 2FG 32796 Fan speed at start min
–1
OEM 3500 2500 2200 2500 2500
29 2FH 32797 Maximum fan speed min
–1
OEM 5000 6300 5500 6500 6800
30 2FI 32798 Minimum fan speed min
–1
OEM 1000 1300 1100 1100 1200
46 4 217 213 / 01
PARAMETER LIST - AUTOMATIC FIRING DEVICE BIC 960