Hoval TopVent TP, Руководство по эксплуатации

Страница: 24 / 48

6.5 Hydraulic assembly diverting system
An assembly for the hydraulic diverting system is included in the delivery.
It consists of the following components:
■ Automatic air vent
■ Coil screw joint
■ Control valve
■ Distributor circuit screw joint
■ Flow
■ Mixing valve
■ Ball valve
■ Return
6.6 Mixing valve
Mixing valves which are optimally matched to the units are available for easy
installation of RoofVent ® units. They have the following specifications:
■ 3-way mixing valve with modulating rotary actuator (run time 9 s)
– Flow characteristic: Equal percentage control path
– Linear bypass
■ Integrated position control and response
6.7 Condensate pump
The condensate pump is installed directly under the condensate drain connection;
the supplied container is prepared for installation on the unit. It pumps the conden-
sate through a flexible hose to a delivery head of 3 m, thus enabling discharge of
the condensate
■ through waste water pipes directly below the ceiling,
■ onto the roof.
6.8 Return temperature sensor
The return temperature sensor monitors the return temperature of the heating
medium.
24
TopVent ® TP
Options
4 218 024-en-04