Hoval Max-3 Скачать руководство пользователя страница 80

Страница: 80 / 88

4 213 563 / 03

COMMISSIONING

Commissioning

8.1

Checks prior to operation

• Check the water pressure in the heating system

• Check the oil level in the oil tank with a dipstick

•

Open shut-off valve in the heating flow and return

• Check fresh air supply to the heating system

• Check the settings for the operating modes

• Check the settings for the boiler control elements

•

Check the oil supply to the burner (open the shut-off

slide valve in the oil line)

• Check the electrical power supply (switch on fuse, turn

the emergency switch to “On” or connect the plug)

8.2

Switching on

Turn on main switch (if fitted).

2. Set blocking switch to “I”.

3. Set the basic program and temperature on the boiler

(chapter 5.4).

8.3

Commissioning

WARNING

Danger of poisoning due to incorrect com-

missioning!

Initial commissioning of a newly installed

system may only be carried out by a heating

specialist. A full installation inspection must

be completed prior to start-up.

Содержание Max-3

























































































Результаты поиска

Содержание Max-3

Отзывы:

Hoval Max-3, Руководство по эксплуатации, Страница: 80 / 88

Результаты поиска

Содержание Max-3

Отзывы: