Hoval Max-3, Руководство по эксплуатации

Страница: 21 / 88

HEATInG SySTEM COnTROL
21 4 213 563 / 03
5.7 Main settings
5.7.1 Changing the room temperature
1
Touch the displayed room temperature to select it.
If there are several heating circuits, make sure that the correct
heating circuit is displayed (example: ground floor). See “Se -
lecting heating circuit” in chapter 5.7.3 page 23.
2
Touch the plus ( ) or minus ( ) button several times to set the requi-
red room temperature.
3
Accept the settings with OK .
The room temperature is only accepted in the active day pro-
gram up to the end of the current cycle. Deactivate the check-
box for “Only for today” to store the change in the active day
program.
4
A change message is displayed. Confirm this with OK . Touch the Back
( ) button if you want to edit the settings again.
5
The current room temperature is displayed on the start screen and goes
up or down until the desired room temperature is reached.
Overview of control elements
Page 1/3
Page 2/3
Page 3/3
Emission
-
Selection heat generator
-
Remaining run time
-
Output limitation
-
Information area
Analysis
-
Selection heat generato
r,
heating cir
-
cuit, hot water
-
Selection duration
-
Diagram display
Visualisation
-
For solar collector systems
Heating circuits
-
Desired room temperature
-
Basic program selection
-
Day program selection
-
Switching cycles room temperature
Hot water
-
Desired HW temperature
-
Basic program selection
-
Day program selection
-
Switching cycles hot water
Programs
-
Selection heating circuit/hot water
-
Detailed selection heating circuit/ hot water
-
Adapting week programs
-
Adapting day programs
System
Display of the next due maintenance/
cleaning/service
Info
-
Information area selection
-
Detailed selection heat generator
, h
ea
-
ting circuit, hot water
, solar
, etc.
-
Information area
User level
-
User level PIN entry
Service
Menu item only for heating specialist
Manual mode
-
Selection heat generator/heating circuit
-
Detailed selection
-
Cooling operation/OFF/heating operation
-
Information
Presentation
-
Language
-
Colour scheme
-
Start screen
-
Backlighting
-
Duration until standby
-
Display until standby
-
Authorisation
-
Configuration analysis
Commissioning
Menu item only for heating specialist
Update
Menu item only for heating specialist
Power station
Influence of weather forecast on
the
heating.
The function is only active
with remote connection.
Functions might not be availa
-
ble for selection, depending
on
the
version of
your operating
element.
Information
-
Information area selection
-
Detailed
selection
heat generator
, hea
-
ting circuit, hot water
-
Information area
Hot water
-
Desired HW temperature
-
Basic program selection
-
Day program selection
-
Switching cycles hot water
-
Selection heating circuit
-
Selection joint operation
active heating
circuit
-
Room temperature setting
-
Day program selection
-
Display active switching cycles
Room temperature/
day program
-
Basic program selection
Basic program
Main menu