24
4 214 153 / 00
HEATING SYSTEM CONTROL
5.7
Main settings
5.7.1 Changing the room temperature
1
Touch the displayed room temperature to select it.
If there are several heating circuits, make sure that the correct
heating circuit is displayed (example: ground floor). See “Se
-
lecting heating circuit” in chapter 5.7.3 page 26.
2
Touch the
plus
( ) or
minus
( ) button several times to set the re-
quired room temperature.
3
Accept the settings with
OK
.
The room temperature is only accepted in the active day pro-
gram up to the end of the current cycle. Deactivate the check-
box for
“Only for today”
to store the change in the active day
program.
4
A change message is displayed. Confirm this with
OK
. Touch the
Back
(
) button if you want to edit the settings again.
5
The current room temperature is displayed on the start screen and goes
up or down until the desired room temperature is reached.
Содержание BioLyt 13
Страница 87: ...87 4 214 153 00 NOTES...
