Hoval BioLyt 13, Руководство по эксплуатации

Страница: 22 / 88

22 4 214 153 / 00
HEATING SYSTEM CONTROL
5.6.2 Optional start screen
The TopTronic
®
E control module includes five different
displays of the start screen. Depending on the individu-
al requirement, the required start screen can be defined
during commissioning and set by the heating specialist.
A subsequent changeover to one of the vari-
ants described below can only be made by the
heating specialist.
Start screen Heat generator
The heat generator screen shows detailed information
about the heat generator. In connection with the Top-
Tronic
®
E online, the weather forecast and the current
phase of the moon are displayed.
Start screen Living comfort (option)
In contrast to the heat generator start screen, the “Living
comfort” start screen focuses on quickly switching over
between day programs (chapter 5.10 page 43) as well
as absence (chapter 5.10.3 page 45). The informa-
tion about heat generators is shown with a smaller size.
In connection with the TopTronic
®
E online, the weather
forecast and the current phase of the moon can also be
displayed.
Start screen Living easy (option)
Please refer to the separate operating instructions for the
room control module easy.
Start screen Industrial (option)
The start screen “Industrial” is usually used in large plants.
As a result, only the current heat generator temperature,
the water pressure (optional), the desired heat generator
temperature and the operating hours are displayed.
Start screen District heating (option)
The current power (%), the temperature deviation be-
tween desired and current temperature in the graph and,
optionally, the current absolute power are displayed.