2.3
Condensate discharge
i
The condensate discharge must be ma-
nufactured of corrosion-resistant materi-
al. The following materials are suitable for
the condensate discharge:
PVC, PE, PP, ABS
Local regulations pertaining to the con-
densate discharge must be observed.
2.3.1 Design variants
Possibility 1 - see chapter 2.4
•
Stand version with siphon
•
With neutralisation, condensate discharge into lower
drain line.
•
Drain optionally on the left or right side.
Fig. 09
Possibility 2 - see chapter 2.5
•
Execution with Neutralisation box
•
For condensate discharge in lower drain line, incl. con
-
densate neutralisation.
Fig. 10
Possibility 3 -see chapter 2.6
•
Siphon and condensate delivery pump
•
Without neutralisation, condensate discharge into high
-
er drain line.
Fig. 11
Possibility 4 - see chapter 2.7
•
Neutralisation box and condensate delivery pump
•
With condensate neutralisation - condensate discharge
into higher drain line.
Fig. 12
8
4 213 784 / 00
ASSEMBLY
Содержание 41-UltraOil 16
Страница 35: ...35 4 213 784 00...
