Page 24 of 30
PNL18 SPECIFICATIONS
General
Operating Band
K-Band
Frequency
24.125 GHz
50Mhz (US) or 24.200 GHz (UK, Australia)
Power Output
5mW
Antenna Beam Pattern
9° x 18°
Polarization
Linear
Supply Voltage
8.5V DC to 16V DC (18VDC Maximum)
Reverse Battery
Protected
Nominal Current Draw
Display blank: 20 mA typical
(@12VDC including radar)
Display at night: 72 mA typical
Display at max brightness: 600 mA typical
Operating Temp.
-40
F to +185
F
(-40
C to +85
C).
Weatherproof
No. User supplied enclosure required.
IR Remote Programmable
No
Approvals
Approvals
FCC Part 15 (US Version)
FCC ID
TIADR600
CE
Approved
IC
21838-DR600
Data Interfaces
Serial Communication
RS232
Data Rate
1200 to 115200 baud
Data Connector
DB9 Female with RS232 levels wired as a DCD. Use 3 wires
straight through cable to PC RS232 port.
Power
Screw terminal or 2 pin Molex Micro-fit.
AUX
10 pin Molex Micro-fit
Optical
LED Color
ITE Amber (592nm ±4nm) for digits. White for strobe cluster.
Brightness
11,000 nits (cdm) maximum, controlled automatically via
onboard light sensor
550nits at night minimum
Viewing Angle
15° cone off normal
Mechanical
Weight
approx 2.1 kg (4.6 lbs)
Dimensions
26.8”x18.5”1.3” (68 x 47 x 3.2 cm)
Mounting
9x #8 screw mounting through holes.
Performance
Speed Measurement Range 0.6mph to 206 mph (0.97km/h to 331 km/h).
