background image

CONTENTS

2

Model Number ______________________________

Serial Number ______________________________

Date of Purchase ____________________________

The model and serial numbers will be found on a decal attached 
to the pressure washer. You should record both serial number and 
date of purchase and keep in a safe place for future reference.

BX  •  8.914-441.0  •  Rev. 05/11

Introduction & Important Safety Information ......................................... 3-4

Component Identifi cation ......................................................................... 5

Assembly Instructions .............................................................................. 6

Operating Instructions........................................................................... 7-8

Detergents & Cleaning Techniques .......................................................... 9

Shut Down and Clean-Up ...................................................................... 10

Storage .................................................................................................. 10

Troubleshooting ................................................................................ 11-12

Preventative Maintenance ..................................................................... 13

Oil Change Record ................................................................................ 13

Warranty

Содержание BX-2527

















Отзывы: