background image

8.914-355.0  •  Rev. 07/17

13

 

 PRESSURE WASHER 

 

OPERATOR’S MANUAL

  

MAINTENANCE

WARNING:  Unauthorized  machine  modification  or 

use of non-approved replacement parts may cause 

personal injury and/or property damage and will void 

the manufacturer warranty.

Pump

Lubrication:

 To lubricate pump, use  30W non-detergent 

oil for pump crankcase. Crankcase must be filled to center 
of sight glass window found on the side of the pump; refer 
to

 Figure 6.

 During the break-in period, make sure the 

oil is changed after the first 25 hours of operation. After 

that, replace oil every 3 months or 300 hours of operation, 
whichever comes first.

Proper Pump Care:

•  DO NOT

 pump acids.

•  DO NOT 

allow pump to run dry.

• 

Winterize if storing in freezing temperatures. Refer 

to 

Storage

 for details.

• 

Use a water softener on the water system if known 
to be high in mineral content.

• 

Use only high quality detergents and follow manu-
facturer’s mix recommendations.

• 

Flush the system with clear water immediately  
after using detergent solutions.

• 

Clean filter screen on detergent inlet line periodi-
cally.

• 

Flush the pressure washer system with antifreeze  
if storing for an extended period of time, refer to 

Storage

 for details.

Pump Motor

On a yearly basis, oil pump motor per instructions on 
motor nameplate.

Relief Valve

WARNING: The relief valve on this pressure washer 

has been factory set and sealed and is a field non-

adjustable part. Tampering with the factory setting 

may cause personal injury and/or property damage, 

and will void the manufacturer warranty. For replace-
ment parts refer to Coil Outlet Assembly

.

If pressure from pump or thermal expansion should ex-

ceed safe limits, the relief valve will open, allowing high 

pressure to be discharged through hose to ground

.

 Cau-

tion: Inspect relief valve annually for any obstruction

.

Unloader Valve

WARNING: The unloader valve on this pressure 

washer has been factory set and sealed and is a 

field nonadjustable part. Tampering with the factory 

setting may cause personal injury and/or property 

damage, and will void the manufacturer warranty. For 

replacement refer to Pump Assembly.

Burner Fuel Filter

Drain any water which has accumulated in fuel filter and 
clean or replace element as needed. For replacement 
parts, refer to 

Burner Assembly.

Heating Coil

Coil Descaling:

 In hard water areas, scale buildup within 

the heating coil will occur. Scale deposits will decrease 

the water temperature rise and may eventually clog the 
heating  coil.  Contact  your  local  service  center  when 

descaling is needed.

Coil Desooting:

 Poor grades of fuel oil or inadequate 

combustion  air  will  cause  heavy  soot  buildup  on  the 

outside surface of the heating coil. These deposits will 
insulate the coil. This will restrict the air flow through the 

coil, further aggravating the soot buildup. Contact your 
local service center when desooting is needed.

  Figure 6 - Pump Lubrication

Oil Fill/Dip Stick

Sight 

Glass

Oil Drain

Содержание 790SS








































Отзывы: