background image

8.914-357.0   •  HOTSY 560SS  •  Rev. 03/11

OPERA

T

OR’S MANU

AL    

PRESSURE W

ASHER 

 

4

RISK OF INJECTION 
OR SEVERE INJURY 

TO PERSONS. KEEP 

CLEAR OF NOZZLE.

WARNING

WA R N I N G :  H i g h   p r e s s u r e 

developed by these machines 
will cause personal injury or 
equipment damage. Keep clear 
of nozzle. Use caution when 
o p e r a t i n g .  D o   n o t   d i r e c t 
discharge stream at people, or 
severe injury or death will 
result. 

 

WARNING

PROTECT FROM 

FREEZING

WARNING: Protect machine from 
freezing.

15.  To keep machine in best 
 

operating conditions, it is 

 

important you protect machine 

 

from freezing. Failure to protect 

 

m a c h i n e   f r o m   f r e e z i n g 

 

could cause malfunction of the 

 

machine and result in death, 

serious bodily injury, and/or property damage. Fol-
low storage instructions specifi ed in this manual.

16.   Inlet water must be clean fresh water and no hotter 

then 90°F.

 

WARNING

RISK OF

ASPHYXIATION: USE 

THIS PRODUCT ONLY 

IN A WELL

VENTILATED AREA.

WARNING: Risk of asphyxiation. 
Use this product only in a well 
ventilated area. 

 17.  Avoid installing machines in 

small areas or near exhaust 
fans. Adequate oxygen is 
needed for combustion or 
dangerous carbon monoxide 
will result.

 18. Manufacturer will not be liable for any changes 

made to our standard machines or any components 
not purchased from us.

19. The best insurance against an accident is precaution 

and knowledge of the machine.

WARNING

RISK OF INJURY FROM 

FALLS WHEN USING 

LADDER.

WARNING: Be extremely careful 
when using a ladder, scaffolding 
or any other relatively unstable 
location. The cleaning area 
should have adequate slopes 
and drainage to reduce the 
possibility of a fall due to slippery 
surfaces.

 

 20. Do not overreach or stand on unstable support. 

Keep good footing and balance at all times.

IMPORTANT SAFETY INFORMATION

WARNING

USE PROTECTIVE 

EYE WEAR

AND CLOTHING 

WHEN OPERATING

THIS EQUIPMENT.

WARNING: High pressure spray 
can cause paint chips or other 
particles to become airborne 
and fl y at high speeds. To avoid 
personal injury, eye, hand and 
foot safety devices must be 
worn.

 11.   Eye, hand, and foot protection 

must be worn when using this 
equipment.

WARNING

EAR PROTECTION 

MUST BE WORN

WARNING: This machine exceeds 
85 db appropriate ear protection 
must be worn.

 

WARNING

HOT DISCHARGE FLUID:

DO NOT TOUCH OR 

DIRECT DISCHARGE 

STREAM AT PERSONS.

WARNING: Hot discharge fl uid. 
Do not touch or direct discharge 
stream at persons.

WA R N I N G :   T h i s   m a c h i n e 
produces hot water and must 
have insulated components 
a t t a c h e d   t o   p r o t e c t   t h e 
operator.

WARNING

RISK OF INJURY: 

HOT SURFACES 

CAN CAUSE BURNS

WARNING: Risk of injury. Hot 
surfaces can cause burns. Use 
only designated gripping areas 
of spray gun and wand. Do not 
place hands or feet on non-
insulated areas of the pressure 
washer.

 

 12. To reduce the risk of injury, close supervision is 

necessary when a machine is used near children. 
Do not allow children to operate the pressure 
washer. 

This machine must be attended during 

operation. 

TRIGGER GUN KICKS 

BACK - HOLD WITH 

BOTH HANDS

WARNING

WARNING: Grip cleaning wand 
securely with both hands before 
starting. Failure to do this could 
result in injury from a whipping 
wand.

13.   Never make adjustments on 

machine while in operation.

 14.  Be certain all quick coupler 

fittings are secured before 
using pressure washer.

Содержание 560SS

















Отзывы: