ET • 8.922-845.0 • Rev. 03/14
OPERA
T
OR’S MANU
AL
PRESSURE W
ASHER
8
ASSEMBLY INSTRUCTIONS
STEP 1:
Attach the high pressure
hose to the spray gun.
STEP 4:
Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
STEP 6:
Connect the high pressure
hose to the pump discharge fi tting.
Push coupler collar forward until
secure.
STEP 2:
Attach wand to spray gun.
Tighten both by hand.
STEP 3:
Pull the spring-loaded col-
lar of the wand coupler back to insert
your choice of pressure nozzle.
STEP 7:
Connect the garden hose
to pump inlet. Inspect inlets.
CAUTION: Do not run the pump
without water or pump damage
will result.
Safety
Latch
Spray
Gun
High
Pressure Hose
Wand
Spray Gun
Wand
Coupler
Pressure
Nozzle
Pressure
Nozzle
Wand
Coupler
Wand
Collar
Pump
Discharge
Fitting
High
Pressure
Hose
Pump Water Inlet
Garden
Hose
Coupler
Collar
STEP 5:
Remove shipping cap and
install oil dipstick. Check pump oil
level by using dipstick. Use 40 wt.
non detergent oil.
Dipstick
Содержание 1.106-107.0
