VLSR1090G– Hotpoint 3.2 Cu. Ft. Super Capacity Washer
Specification Created 11/06
Washer Dimensions (in inches)
36
25-1/2
42
51
Side View
27
Rear View
36
42
27
2
3-1/2
2-1/2
25-1/2*
Side View
Rear View
8-1/2
25-3/4
23-1/2
11-1/2
*24-1/2" from the edge of the side panel to the front.�
25-1/2" from front to edge of endcaps.
Washer/Dryers SC QSart
Circuit Requirements:
An individual, properly-grounded branch circuit,
with a three-prong grounding-type receptacle, protected by a 15 or
20 amp circuit breaker or a time-delay fuse, is required.
Electrical Rating:
115V, 60Hz, 10 Amps
Installation Information:
Before installing, consult installation
instructions packed with product for current dimensional data.
Washer Note:
Washer wall outlet must be located within 36" of
service cord entry. Wall outlet must not be located behind dryer.
Listed by
Underwriters
Laboratories
