GB
9
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
7. During cooking it is always possible to:
- change the temperature by pressing the
button,
followed by the
+
and
-
buttons (manual modes only);
- set the duration of a cooking mode (see Cooking
Modes);
- press the
button to stop cooking. In this case the
appliance stores the temperature modified previously in
its memory (manual modes only);
- switch off the oven by pressing the
button for 3
seconds.
8. If a blackout occurs while the oven is already in
operation, an automatic system within the appliance will
reactivate the cooking mode from the point at which it
was interrupted, provided that the temperature has not
dropped below a certain level. Programmed cooking
modes which have not yet started will not be restored
and must be reprogrammed (for example: a cooking
mode has been programmed to start at 20:30. At 19:30
a blackout occurs. When the power supply is restored,
the mode will have to be reprogrammed).
!
There is no preheating stage for the GRILL mode.
!
Never put objects directly on the bottom of the oven;
this will prevent the enamel coating from being damaged.
!
Always place cookware on the rack(s) provided.
Cooling ventilation
In order to cool down the external temperature of the
oven, a cooling fan blows a stream of air between the
control panel and the oven door, as well as towards the
bottom of the oven door.
!
Once cooking has been completed, the cooling fan
continues to operate until the oven has cooled down
sufficiently.
Oven light
The light comes on when the oven door is opened or
when a cooking mode starts.
The
button can be used to switch ons/witch off the
light at any time.
! Do not use the oven lamp as/for ambient lighting
Residual heat indicators
The appliance is fitted with a residual heat indicator. When
the oven is off, the “residual heat” bar on the display lights
up to indicate high temperatures inside the oven cavity.
The individual segments of the bar switch off one by one
as the temperature inside the oven falls.
Demo mode
The oven can operate in the DEMO mode: all heating
elements are deactivated, and the controls remain
operative.
To activate DEMO mode, switch oven on at power button
, then
buttons
+
and
-
simultaneously for 6 seconds,
and then press and release button
. A buzzer sounds
and the TEMPERATURE display shows “dEon”.
To deactivate DEMO mode, when the oven is off press
and hold button
and button
-
simultaneously for 3
seconds. A buzzer sounds and the “dEoF” message
disappears from the display.
Restoring the factory settings
The oven factory settings can be restored to reset all
selections made by the user (clock and customised
durations). To carry out a reset, switch off the oven,
then press and hold the button corresponding to
the first manual cooking mode (top left) and the
button simultaneously for 6 seconds. Once the restore
procedure is complete, a buzzer will sound. The first time
the
button is pressed, the oven will behave as if it is
being switched on for the first time.
Standby
This product complies with the requirements of the
latest European Directive on the limitation of power
consumption of the standby mode. If no buttons are
pressed for 30 minutes and the control panel lock has
not been activated, the appliance automatically reverts
to standby mode. Standby mode is indicated by the high
luminosity “Clock button” light. As soon as interaction
with the machine resumes, the system’s operating mode
is restored.
