HOTO QWLDZ001 Скачать руководство пользователя страница 7

21

Stay alert, watch what you are doing and use common sense when operating 
a power tool. Do not use a power tool while you are tired or under the 
influence of drugs, alcohol or medication. 

A moment of inattention while 

operating power tools may result in serious personal injury. 

Use personal protective equipment. Always wear eye protection.

 

Protective 

equipment such as a dust mask, non-skid safety shoes, hard hat or hearing 
protection used for appropriate conditions will reduce personal injuries.

 

Prevent unintentional starting. Ensure the switch is in the off-position before 
connecting to power source and/or battery pack, picking up or carrying the 
tool. 

Carrying power tools with your finger on the switch or energising power 

tools that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. 

wrench or a key left attached to a rotating part of the power tool may result in 
personal injury. 

Do not overreach. Keep proper footing and balance at all times. 

This enables 

better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair and 
clothing away from moving parts. 

Loose clothes, jewellery or long hair can be 

caught in moving parts.

If devices are provided for the connection of dust extraction and collection 
facilities, ensure these are connected and properly used. 

Use of dust 

collection can reduce dust-related hazards.

Do not let familiarity gained from frequent use of tools allow you to become 
complacent and ignore tool safety principles.

 

A careless action can cause 

severe injury within a fraction of a second.

Personal Safety

Содержание QWLDZ001

















Отзывы: