Error
Driller stops spinning in
operation
Driller stops spinning in
operation
Unable to insert drill
Continuous use of the
machine under heavy load
which results in drive board
overheating
Lithium battery out of
power
Mismatched drill
size and chuck
Switch Flip locked up
in the middle
Driller does not operate
after pressing Switch
Unable to charge battery
Cool down
Driller stops spinning in
operation
Continuous use of the
machine under heavy load
which results in battery
overheating or single
battery undervoltage
Cool down and charge
Charge the battery
Use drills from the kit or drills
with a diameter of ≤ 10 mm
Cause
Solution
Push the Reverse Pushbutton to
the left or right (look from the rear
of the machine towards the chuck)
USB cable not plugged in
or not using the specified
charging cable
Check whether the battery
indicator light is on and use
the specified charging cable
Troubleshooting
27