HOTO QWLDZ001 Скачать руководство пользователя страница 11

25

Hold the power tool securely. 

When tightening and loosening screws be prepared 

for temporarily high torque reactions.

In case of damage and improper use of the battery, vapours may be emitted. 
The battery can set alight or explode. 

Ensure the area is well ventilated and seek 

medical attention should you experience any adverse effects. The vapours may 
irritate the respiratory system.

Do not open the battery. 

There is a risk of short-circuiting.

The battery can be damaged by pointed objects such as nails or screwdrivers 
or by force applied externally.

 An internal short circuit may occur, causing the 

battery to burn, smoke, explode or overheat.

Only use the battery with products from the manufacturer.

 This is the only way 

in which you can protect the battery against dangerous overload.

Protect the battery against heat, e.g. against continuous intense sunlight, fire, 
dirt, water and moisture. 

There is a risk of explosion and short-circuiting.

            All products bearing this symbol are waste electrical and electronic  equipment
             (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
            household waste. Instead, you should protect human health and the 
environment by handing over your waste equipment to a designated collection point 
for the recycling of waste electrical and electronic equipment, appointed by the 
government or local authorities. Correct disposal and recycling will help prevent 
potential negative consequences to the environment and human health. Please 
contact the installer or local authorities for more information about the location 
as well as terms and conditions of such collection points.

                   We Shanghai HOTO Technology Co., Ltd., hereby, declares that this 
                   equipment is in compliance with the applicable Directives and European 
Norms, and amendments. 

Содержание QWLDZ001

















Отзывы: