5
SAUNA TIMER
Heaters have a 60-minute timer (0 to large
1 on the dial), and if you wish to use the
full 60-minute cycle, turn the timer knob
past the first 1 to number 2 or 3 on the
dial. Then turn backward to the large 1
until a click is heard. Leave knob at the
setting, and sauna will operate for 1-hour
before shutting off automatically.
Allow at least 30-minutes for room to
heat up to an average sauna temperature.
Note!! If you set timer past first 1, timer
will not come on until the time set has
elapsed. The 60-minute timer is quiet. It
does not tick.
Have an added feature--an 8-hour time
clock (1 to 8 on the timer dial). If you
wish to preset your sauna heater to
automatically turn on when you are away,
you may preset up to 8-hours in advance
of sauna bathing.
For example, if you set the timer knob at
number 3 setting, the sauna heater will
turn on 3 hours later, and will be ready for
useage in 3 and 1/2 hours (allowing for 1/2
hour heat up time). The heater will shut
off automatically in another half hour, and
if you wish to continue using the sauna,
reset the 60-minute timer back up to the
large 1.
Heat control (thermostat) must be set
between minimum and maximum
heating, or the timer will not cause the
sauna to heat. Put heat control setting to
maximum, heat sauna for 1/2 to 1 hour
to observe adequate sauna temperature.
If room is too hot, adjust heat control
knob back toward minimum setting, until
desired temperature is reached.
