Hospira GemStar Series, Руководство по эксплуатации системы

Страница: 98 / 221

Hospira GemStar System Operating Manual 89
Chapter 7. Weight Dosed
8
If using the PURGE key to prime the pump set, press [
PURGE
] now.
Auto KVO
When the programmed VTBI has completed delivery, Auto KVO delivery begins
automatically and the empty container alarm sounds.
Rate Titration
To titrate the rate while the pump is infusing:
1
In the
RUN
mode, press the number keys for the new rate. Press [
YES/ENTER
].
For example: if the current rate is 7.5 mcg/kg/min, press [
1
][ 0 ] [
YES/ENTER
] to
change the rate to 10 mcg/kg/min.
2
NEW RATE
displays with the new value.
• Press [
YES/ENTER
] within 10 seconds to accept the change and begin
delivery at the new rate.
• Press [
NO
] to continue delivery at the previously programmed rate.
WARNING: ALWAYS disconnect the pump set from the patient before
priming or purging.
d
Note: Auto KVO delivers even while the empty container alarm sounds. Press
[
SILENCE
] to quiet the alarm for 2 minutes.
If the weight dosed rate is: Auto KVO delivers at:
Greater than or equal to 1 mL/hr 1 mL/hr
Less than 1 mL/hr The weight dosed rate
d
Note: You have approximately five seconds after pressing a key to press another
numeric key, the decimal key, or [
YES/ENTER
] . If no key is pressed within five
seconds, the rate does not change and the delivery continues as previously
programmed.