Hospira GemStar Series Скачать руководство пользователя страница 210

Страница: 210 / 221

Hospira GemStar System Operating Manual

201

Chapter 18

Warranty/Technical Assistance

The GemStar Pump has been carefully manufactured using high-quality components.

It is warranted to be free from defects in material and workmanship for a period of one

year from the date of purchase under normal use and service. The warranty on the

optional battery pack and other accessories is limited to 90 days.

On return to Hospira, the pump will be repaired or replaced within the terms of this

warranty. Material returned to Hospira must be properly packaged and sent freight

prepaid.

This warranty shall not apply if the pump has been repaired by anyone other than

Hospira qualified service personnel; or altered in any way which, in Hospira’s

judgment, affects its stability or reliability; or if the serial number has been altered,

effaced, or removed.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED.

Содержание GemStar Series






























































































































































































































Результаты поиска

Содержание GemStar Series

Отзывы:

Бренды по названию

Популярные бренды

Hospira GemStar Series, Руководство по эксплуатации системы

Результаты поиска

Содержание GemStar Series

Отзывы:

Бренды по названию

Популярные бренды