Hospira GemStar Series, Руководство по эксплуатации системы

Страница: 143 / 221

Chapter 11. Clinician Instructions
134 Hospira GemStar System Operating Manual
Unlocking the Pump
1
Press [
OPTIONS
] to display the Options Menu.
2
Select
KEYPAD LOCK
from the Options Menu.
3
Select the lock level to be unlocked.
4
Enter the lock sequence number for that level.
5
The pump displays the current lock levels. Press [
YES/ENTER
] to return to the
mode the pump was in when [
OPTIONS
] was pressed.
Program and Deliver a Clinician Activated Loading Dose
This feature is available only when the keypad is
UNLOCKED
or when
THERAPY
is the only lock level. The default loading dose rate is 125
mL/hr.
1
From the
STOP
mode, press [
YES/ENTER
] [
0
].
2
The pump displays:
PROGRAM A LOADING DOSE?
Press [
YES/ENTER
].
3
Enter the loading dose. Press [
YES/ENTER
].
4
The pump displays:
DELIVER THE LOADING DOSE NOW?
To deliver the loading dose immediately, press [
YES/ENTER
].
Primary infusion DOES NOT begin automatically when the clinician activated
loading dose is complete. Press [
START
] to continue primary infusion.
To deliver the loading dose later, press [
NO
].
d
Note: If the pump is locked under two levels, each level must be unlocked
separately. Unlocking one level has no effect on the other level. For example, if
both
THERAPY
and
RATE CHANGE
lock levels are applied, the clinician must
unlock both the
RATE CHANGE
and
THERAPY
locks.
d
Note: Loading dose amounts are included in a 1-hour or 4-hour dose limit.