Hospira GemStar Series, Руководство по эксплуатации системы

Страница: 141 / 221

Chapter 11. Clinician Instructions
132 Hospira GemStar System Operating Manual
Clinician Locking Sequence Instructions
Locking the Pump
To lock the pump from the
RUN
or
STOP
mode:
1
Press [
OPTIONS
] to display the Options Menu.
2
Select
KEYPAD LOCK
from the Options Menu.
3
Select the desired lock level. For
THERAPY
,
CONTAINER,
and
FULL
Lock, go to
step 5.
4
For
RATE CHANGE
Lock, set the minimum and maximum programmable ranges
for the continuous delivery rate and bolus dose in a Pain Management program.
•
MIN
flashes on the display. Enter the minimum value.
•
MAX
flashes on the display. Enter the maximum value.
5
Press [
YES/ENTER
] when done.
6
Repeat steps 4 and 5 for a bolus dose if available in the current program.
7
Enter the lock sequence number. Asterisks display as the numbers are entered.
•
For
THERAPY
Lock, enter [
0
][
0
][
0
][
3
][
1
].
• For
UNLOCKED
,
FULL
,
CONTAINER
, and
RATE CHANGE
lock levels, enter
[
1
][
3
][
0
][
0
][
0
].
d
Note: If a lock level is already applied to the pump, the Lock Sequence Number
must be entered before a second lock level can be applied. Refer to Adding a
Second Lock Level on page 133 for more information.
f
Tip: Press to toggle between the MIN and MAX values.
d
Note: Default lock sequence numbers are shown.