Hospira GemStar Series, Руководство по эксплуатации системы

Страница: 131 / 221

Chapter 10. Options Menu
122 Hospira GemStar System Operating Manual
Speed Protocol
1
Press [
OPTIONS
] and select
SPEED PROTOCOL
.
2
Press the number key for the desired protocol
function.
3
Follow the display messages. Refer to the
instructions for Speed Protocol functions for more
information.
Assign
1
Press [
OPTIONS
] and select
SPEED PROTOCOL
.
2
Select
ASSIGN
from the Speed Protocol menu.
3
Select [
1
]–[
9
] to assign to the new protocol.
If the selected speed protocol is already assigned, the pump displays
REPLACE
PROTOCOL ASSIGNMENT?
• Press [
YES/ENTER
] to replace the protocol. The pump displays the new speed
protocol and exits
OPTIONS
.
• Press [
NO
] to keep the existing protocol and exit
OPTIONS
.
d
Note: Up to nine speed protocols are stored at one
time. The speed protocols stay in memory, even when
the pump is powered down, until they are deleted.
Select this item from
the Speed Protocol Menu:
To do this function:
ASSIGN
Store a program in pump memory for later use.
REVIEW/RECALL
Review assigned protocols from the
RUN
or
STOP
mode. Recall an assigned protocol from
the
STOP
mode.
DELETE
Delete protocols from pump memory.
1 REVIEW PROGRAM
2 HISTORIES
3 KEYPAD LOCK
4 PUMP SETTINGS
5 SET CLOCK
6 PRINT
7 SPEED PROTOCOL
8 NEXT DOSE