Hospira GemStar Series, Руководство по эксплуатации системы

Страница: 122 / 221

Hospira GemStar System Operating Manual 113
Chapter 10. Options Menu
History
To display the history event log:
1
Press [
OPTIONS
] and select
HISTORIES
.
2
Select
HISTORY
from the Histories Menu.
3
Press or to scroll the display.
4
Press [
BACK-UP
] when done to exit
OPTIONS
.
Shift Totals
To display the shift totals:
1
Press [
OPTIONS
] and select
HISTORIES
.
2
Select
SHIFT TOTALS
from the Histories Menu.
3
The shift totals display. Press or to scroll
the display.
To clear the shift totals:
1
Follow the steps for displaying shift totals.
2
At the end of the shift totals, the pump displays
CLEAR TOTALS? YES OR NO:
• Press [
YES/ENTER
] to clear
the shift totals.
• Press [
NO
] to exit
OPTIONS
without clearing the shift totals.
f
Tip: Press and HOLD or to scroll through the history displays faster.
f
Tip: Press [ HELP ] to display shift totals when the pump is not in PROGRAMMING
mode or an alarm condition.
VERSION N.NNN
S/N XXXXXXXX
TIME IS 09:00 AM
FRI, NOV 10, 06
NEW CONTAINER
08:15AM NOV 10
HISTORY CLEARED
11:00PM NOV 9
EVENT LOG
PM11:18 SET ON
AIR SENSITIVITY
PM11:18 SET CONT
SIZE 100 mL
PM11:18 SET RATE
1.0 mL/hr
PM11:18 SHIFT
CLEARED
END OF EVENT LOG
Sample History Event Log
END OF
SHIFT TOTALS
CLEAR TOTALS?
YES OR NO