9
Fig. 1
II. Installation and Operating Instructions
1. Checks Before Installation
WARNING
Remove shipping carton, tape(s) and packing. If packing material is left in
the icemaker, it will not work properly.
IMPORTANT
Ensure all components, fasteners and thumbscrews are securely in place.
1) Remove all panels to prevent damage when installing the icemaker. (See “2. How to
Remove Panels.”)
2) Remove the package containing the accessories from inside the icemaker.
3) Remove the protective plastic film from the panels. If the icemaker has been exposed
to the sun or to heat, remove the film after the icemaker cools.
4) Check that the refrigerant lines do not rub or touch lines or other surfaces.
5) See the nameplate on the rear panel, and check that your supplied voltage
corresponds with the voltage specified on the nameplate.
6) This icemaker requires a storage bin. The recommended storage bin is HOSHIZAKI
ICE STORAGE BIN, Model B-500 series.
7)
This icemaker is designed for connection to HOSHIZAKI CONDENSING UNIT,
Model SRC-10H only!
NOTE: CONNECTION TO ANOTHER CONDENSING UNIT WILL VOID
WARRANTY.
2. How to Remove Panels
See Fig. 1
a) Front/Rear Panel ..... Remove the screw(s).
Lift up and pull towards you.
b) Top Panel ................ Lift up.
c) Side Panel ............... Remove the thumbscrew.
Pull up and lift off.
