10
Fig. 2
3. Location
WARNING
This icemaker is not intended for outdoor use. Normal operating ambient
temperature should be 45°F to +100°F; Normal operating water
temperature should be 45°F to +90°F. Operation of the icemaker for
extended periods outside of these normal temperature ranges may affect
production capacity.
For best operating results:
• Icemaker should not be located next to ovens, grills or other high heat producing
equipment.
• Location should provide a firm and level foundation for the equipment.
• Allow 6" clearance at rear and sides for proper air circulation and ease of maintenance
and /or service should they be required. Allow 24" clearance at top to allow for
removal of the auger.
4. Setup
1) Unpack the storage bin, and attach the four adjustable legs provided (bin accessory)
to the bottom of the storage bin.
2) Position the storage bin in the selected permanent position.
3) Place the icemaker on the top of the storage bin.
4) Secure the icemaker to the storage bin by using
the two braces, four bolts, and four self-tapping screws
provided. The four bolts come attached to the icemaker.
Use the four self-tapping screws to make the appropriate
holes in the storage bin. See Fig. 2.
5) Insure a proper seal between the icemaker and the
storage bin.
6) Level the icemaker/storage bin in both the
left-to-right and front-to-rear directions. Adjust
the storage bin legs to level the icemaker.
7) Replace the icemaker's panels. Secure the front panel and rear panel
with the proper screw(s) and each side panel with the proper thumbscrew.
