Hosa Drive Bluetooth Audio Receiver User Manual
This interface turns almost any audio input into a Bluetooth receiver. Your wireless
devices can now be used freely from the car to even a recording studio. To get your
devices hooked up wirelessly, please follow these instructions carefully:
Connection Procedure
1.
Connect the Bluetooth receiver to the audio input of the listening device of
your choice
a.
A 3.5 mm TRS “aux” cable is included and can be used for car stereos,
headphones, and other devices that use a 3.5 mm TRS connection for a
stereo input
b.
The Hosa Drive line also consists of a 3.5 mm TRS to dual RCA stereo
breakout that can be purchased for home stereo systems with RCA
inputs
c.
You can also purchase a 3.5 mm TRS to dual XLR stereo breakout
cable if you wish to connect this receiver to individual channels of an
audio workstation
Pairing Procedure
1.
Hold center button until blue LED begins to flicker
2.
Enter Bluetooth settings on the device you wish to pair and scan for new
devices
3.
Select HOSA as the device you wish to pair and enter “0000” if a password is
requested
4.
If pairing is successful, the blue LED will slowly pulse
Operation
The buttons on Bluetooth receiver allow you to control playback of the source
device.
A.
Center button plays and pauses current track
B.
Left “-‐“ button starts current track from the beginning
C.
Right “+” button skips to next track in playlist
Hold center button until LED flickers blue to turn on device. The same operation
powers down the device.
