Horst Welding HLA SNOW DOUBLESHOT HS200, Руководство оператора

Страница: 11 / 20

Horst Welding Page 1 1
MOUNTING
HS100
Several different methods of mounting are
available , depending apon the machine
and the type of mounting system:
• U niversal Skid Steer mount,
• C AT 1, three point hitch mount for a
tractor,
• A ssortment of loader quick attach plates
• CAT 1, t hree point hitch hydraulic loader
frame.
They fasten to the spreader by means of ten
bolts (5 per side) to allow you to move the
spreader between different types of prime
movers.
On the HS spreader, there are 7 mounting
holes on each side. When mounting the
three point hitch, use the top five holes to
allow for more clearance for the PTO.
The remaining mounting types may be
mounted on the bottom five holes. These
may be adjusted as required depending on
your machine.
HYD DRIVE/SELF LOADING
3PH CAT 1
UNIVERSAL
SKIDSTEER QTACH
HYD 3PH CAT1,
NON SELF LOADING
Top five holes used
for three point hitch
adapter