horsch Terrano 4.3 GX, Руководство по эксплуатации

Страница: 88 / 114

9 | Care and maintenance
88 60084498 • 01 • 06/2022 • en
9.1.4 At the end of the season
Maintenance location Work instructions
Complete machine Perform care and cleaning work; do not spray plastic parts with oil or similar.
Spray the piston rods of the hydraulic cylinder with a suitable corrosion protection
agent.
Check all screw and plug-and-socket-connections for firm seating (see torque table)
Check frame and connecting pieces for condition and tight fit.
Check electrical lines for damage and replace, if necessary.
Brake system Release parking brake, close brake lines, check setting
Pneumatic brake Drain air reservoir.
Antifreeze can be added to the compressed air to ensure the reliable function of valves
and seals.
Follow the operating instructions of the tractor.
Levelling discs Spray mounts with penetrating oil.
9.2 Ball-and-socket coupling
Before each connecting
1. Clean ball and spherical cap.
2. Replace the foam ring if damaged and/or heavily soiled.
3. Place the foam ring.
4. Check ball and spherical cap for wear. Hold the gauge lengthwise toward the
direction of travel. The wear limit has been reached when the gauge rests fully
on the ball or enters the spherical cap.
Fahrtrichtung
Check ball for wear