horsch Shuttle 8.000 L, Руководство по эксплуатации

Страница: 58 / 65

NOTE
When connecting hydraulic hoses to moving
parts , the length of the hose must be dimen-
sioned in such a way that over the total move-
ment range the bending range is not lower
than permitted and/or the hydraulic hose is not
subjected to tensile loads.
Storage
¾
Clean the machine thoroughly. Chaff and dirt
will attract moisture, which causes corrosion.
¾
Park the machine indoors and secure it with
wheel chocks against rolling away.
¾
Protect the machine against corrosion. Use
only biodegradable oils for anti-rust spraying.
NOTE
¾
Do not spray the plastic and rubber parts with
oil or corrosion protection agent. These parts
could become brittle and break.
At the end of the season
NOTE
If a high pressure cleaner is used for cleaning,
do not direct the water jet to bearings, electrics/
electronic components and sensitive cover
panels.
¾
Clean the filter insert.
¾
Lubricate the machine according to the lubri-
cation plan.
¾
Grease the visible threads of setscrews and
similar.
¾
Wet all lever joints and bearing points, which
are not subjected to lubrication, slightly with
oil.
NOTE
Make a note of all service and maintenance work
that has to be done before the start of the next
season and place a corresponding order with
your HORSCH sales partner in due time. Your
HORSCH sales partner will be in a much better
position to execute the maintenance service and
possibly necessary repairs outside the season.
54